Shanghai Sunland Industrial Co., Ltd is the top manufacturer of Personal Protect Equipment in China, with 20 years’experience. We are the Chinese government appointed manufacturer for government power,personal protection equipment , medical instruments,construction industry, etc. All the products get the CE, ANSI and related Industry Certificates. All our safety helmets use the top-quality raw material without any recycling material.
Sound proof earmuff for gun training
We provide exclusive customization of the products logo, using advanced printing technology and technology, not suitable for fading, solid and firm, scratch-proof and anti-smashing, and suitable for various scenes such as construction, mining, warehouse, inspection, etc. Our goal is to satisfy your needs. Demand, do your best.
Professional team work and production line which can make nice quality in short time.
The professional team provides 24 * 7 after-sales service for you, which can help you solve any problems
To comply with the Personal Protective Equipment Regulations 1992, employers ,must, provide all employees with, and ensure they wear, suitable head protection. Employees should be provided with a ,safety helmet, or hard hat for use at work; bump caps only protect from non-moving hazards and are not adequate protection for construction workers.
Motorcycle ,Helmet, Standards. All motorcycle ,safety helmets, worn while riding on roads in the UK ,must, meet one of the following regulations: British Standard BS 6658:1985 and carry the BSI Kitemark. UNECE Regulation 22.05. A European Economic Area member standard offering at least the same ,safety, and protection as BS 6658:1985. It ,must, also ...
1.3 ,Helmet, use is effective at reducing head injuries: This section summarizes the evidence from studies that have evaluated the effectiveness of ,helmets, in reduc-ing death and injury. 1.4 ,Helmet, programmes are effective at getting ,helmets, on heads: Introduc-ing legislation on ,helmet, use has been shown to be effective in increasing ,helmet,-
The SOLAS 2014 amendments and the Fire ,Safety, Systems (FSS) ,Code, adopted by IMO Resolutions MSC.338(91) and MSC.339(91) will enter into force on 1 July, 2014, introducing revised and new requirements for fireman’s outfit breathing apparatus and two-way portable radiotelephone apparatuses.
The Occupational ,Safety, and Health Administration (OSHA) guidelines for head protection are referenced in 29 ,Code, of Federal Regulations (CFR) 1910.135 and 1926.100. 29 CFR 1910.135(a)(1) states, "Each affected employee shall wear protective ,helmets, when working in areas where there is a potential for injury to the head from falling objects."
the characters on the ,number, plate are visible from 20m away at any point within an arc of 45º from the surface of the ,number, plate above or to either side of the vehicle. Any cover on the ,number, plate ,must,— be clear, clean, untinted and flat over its entire surface and; have no reflective or …
To make sure that a ,helmet, does not block a rider’s side vision, a ,helmet must, let the rider see without interference for at least 105° on either side of the center of his or her face. Please see §1203.14 for the test to determine whether a ,helmet, meets this requirement.
“,Safety, Cage” means a multi-tubular structure installed in the cockpit and fitted close to the interior profile of the bodyshell. Its “principal structure” being the structural framework consisting of a ,Safety, Rollbar (as detailed in (1) above), plus a Front Rollbar (or of two(2) Lateral Rollbars), their connecting members, two(2) Backstays, one(1) Diagonal member, a ,safety, harness bar ...
6 2.2 Machine 2.2.1 Sizing of the lifting equipment 184.108.40.206 One of the most critical factors in planning a lifting operation is to ensure that lifting equipment selected for the job has sufficient lifting capacity and reach to handle the intended load.
What colours are ,safety helmets, (hard hats) on construction sites? In a bid to make construction sites safer a new colour coded system of ,safety helmets, came into force for Build UK member organisations in January 2017 - with white becoming the most common colour on construction sites.