Shanghai Sunland Industrial Co., Ltd is the top manufacturer of Personal Protect Equipment in China, with 20 years’experience. We are the Chinese government appointed manufacturer for government power,personal protection equipment , medical instruments,construction industry, etc. All the products get the CE, ANSI and related Industry Certificates. All our safety helmets use the top-quality raw material without any recycling material.
Anti wrestling helmet
We provide exclusive customization of the products logo, using advanced printing technology and technology, not suitable for fading, solid and firm, scratch-proof and anti-smashing, and suitable for various scenes such as construction, mining, warehouse, inspection, etc. Our goal is to satisfy your needs. Demand, do your best.
Professional team work and production line which can make nice quality in short time.
The professional team provides 24 * 7 after-sales service for you, which can help you solve any problems
Disconnect power to equipment before performing any service or troubleshooting; 4. ,use, dry insulation, such as a rubber mat or dry wood to insulate the welder from the workpiece and ground; 5. never touch electrically live parts or the electrode with bare skin or wet clothing; 6. never permit an electrode holder to come in contact with a ,welding, machine or gas cylinder; 7.
Some ,types, of weld ,helmet, may also include a range for #3 to #8 which is ,used, when grinding or ,cutting,. In a passive ,welding helmet,, there is only one shade value and typically this will be #10. That means it can ,be used, for low to medium amp values only.
Auto-Darkening ,Helmet,. ,Welding helmets, are an essential part of ,welding safety, as it provides the welders with ultimate protection for their faces and neck from getting exposed to the sparks and fumes flying around. It is quite impossible to even think about ,welding, without wearing a ,safety helmet,.
When• ,welding, or ,cutting, in areas not normally designed• for such operations, ,use, a hot work permit• system. The hot work permit system includes a• check list ,of safety, precautions and also alerts• other workers to an extraordinary danger of fire• that will exist at a particular time.
In compliance with the standards objectives, specifying ,safety helmets, is dependent on hazards involved. AS/NZS 1801:1997 classifies ,safety helmets, into three ,types,: UniSafe Saftey ,helmets,: ,Type, 1- General industrial ,safety helmets,. ,Type, 2- ,Helmets, intended for high temperature workplaces. ,Type, 3- ,Helmets, intended for bushfire fighting.
14/10/2020, · ,Welding safety, measures are designed to protect employees from ,welding, hazards. ,Welding safety, can be implemented by conducting proper training, inspecting ,welding, equipment, and ensuring workers are aware ,of safety, precautions before performing ,welding, activities to minimize the risk of health and ,safety, injuries.
during ,cutting,, ,use, of a full-face shield or ,helmet, over ,safety, glasses of the correct filter shade is recommended. • Be sure the selected glasses or goggles meet the impact, heat, and filtering requirements specified in ANSI Z87.1— look for a label on the carton and product stating compliance. SUMMARY • Always choose ,welding helmets, and
16/9/2020, · Trousers and overalls ,should, not be turned up on the outside. For heavy work, fire-resistant leggings, high boots, or other equivalent means ,should be used,. In production work ,welding safety,, a sheet metal screen in front of the worker´s legs can provide further protection against sparks and molten metal in ,cutting, operations.
Helmets, shall be made of material that complies with ANSI Z49.1. Filter lenses and cover plates must meet the tests prescribed in ANSI Z87.1. Wear approved ,safety, glasses with side shields (or goggles) under your ,helmet,. The ,safety, glasses with side shields (or goggles) are ,used, to protect against
Construction can be a safe occupation when workers are aware of the hazards, and an effective ,Safety, and Health Program is ,used,. Standards ,Welding,, ,cutting,, and brazing is addressed in specific OSHA standards for general industry, maritime, and construction.